CUCM7 admin prompt?

Cisco CallManager, Cisco CallManager Express and IP Video
Post Reply
Guest

CUCM7 admin prompt?

Post by Guest » Fri Dec 30, 2005 7:56 am

Hello all, I installed CUCM7 in Vmware server. It loads to a login prompt, which I type in my login and password.  Then Im successfully at the "admin" prompt.  So how do I get to the Call Manager 7 GUI from here?  Everything I find simply states to go to https://<ip address>/ccmadmin/, but this isn working. I assume because the only IE interface I have is not in the VMware, but on my PC.  Can anyone help me out here? Thank you greatly in advance,Eric

Guest

Re:CUCM7 admin prompt?

Post by Guest » Fri Dec 30, 2005 8:35 am

Hi You need to have IP reachability from a client device (i.e your PC) to the CCM server. You can only configure CCM from a remote web browser session. So if you are using VMWare, either: 1) Give the server an address on your local VLAN, and use a bridged LAN interface in the VM.2) Give the server an address in the host only subnet, and set the host only network option. 3) Set the server to host only networking, and then change the address on the host only NIC in your VMWare host PC to have an address on the same IP subnet as the CCM server. Really Option 1 above is the only practical one if you have IP phones or other devices not on your VM host that you want to use with the CCM server.  Regards Aaron Please rate helpful posts...

Guest

Re:CUCM7 admin prompt?

Post by Guest » Fri Dec 30, 2005 8:44 am

Aaron, You Rock!  That fixed the issue. Thanks,Eric

Guest

Re:CUCM7 admin prompt?

Post by Guest » Fri Dec 30, 2005 9:10 am

No problem

generic cialis 20mg

hello guos 9128738514

Post by generic cialis 20mg » Wed Jan 06, 2021 2:24 am

hello guos 9128738514

Post Reply