• Advertisement

ASA 5550 standby- need to get SN info remotely

Firewalls, PIX, ASA, VPN, Access Control List, User Authentication, Data Encryption and Best Practices.

ASA 5550 standby- need to get SN info remotely

Postby Guest » Sat Jan 08, 2011 1:26 pm

I need to get the SN info and hardware info from my standby ASA remotely. Is there a way to do it? I tried to SSH to the standby using the standby IP address, and I can connect. I was able to do that with the PIX 535. I also tried via the ADSM and can connect, and logged into the Active Primary and issued various commands but it only gives info on the Active.

Guest
 

Advertisement

Re:ASA 5550 standby- need to get SN info remotely

Postby Guest » Sat Jan 08, 2011 1:47 pm

Hi,

 

Try this,

 

When you are connected to Active box and want to run command on standby use following

 

failover exec standby <command>,   for ex: failover exec standby sh ver

 

Command reference: http://www.cisco.com/en/US/docs/security/asa/asa82/command/reference/ef.html#wp1929296

 

I hope this will help.

 

-Shahid

Guest
 

Re:ASA 5550 standby- need to get SN info remotely

Postby Guest » Sat Jan 08, 2011 1:58 pm

Shahid,

Awesome response!

 

Kristen,

You should take care of why you are not able to ssh or asdm to the sec/standby unit.

Pls. refer this link and run through the checklist: https://supportforums.cisco.com/docs/DOC-13012

 

-KS

Guest
 

Re:ASA 5550 standby- need to get SN info remotely

Postby Guest » Sat Jan 08, 2011 2:22 pm

Thank you. I was able to get the info I needed.

Guest
 



  • Advertisement


Similar topics


Return to Cisco Security

Who is online

Users browsing this forum: Bing [Bot] and 5 guests