• Advertisement

AIR-AP1231G-A-K9 Radio transmit power

Configuring Wireless Cisco Networks and Wireless Controllers.

AIR-AP1231G-A-K9 Radio transmit power

Postby Guest » Thu Dec 09, 2010 4:30 pm

Hi experts,

 

I have some of these WAPs and they all have 8dbi high-gain antennas. Im wondering if I need to tune the "power local cck/ofdm" to certain values to match the antenna gain to make it work the best. The radio is operating in b/g mode. Here is the current config of interface Dot11Radio0.

 

interface Dot11Radio0
no ip address
no ip unreachables
no ip route-cache
!
ssid XXXXXX

!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
no preamble-short
channel 2412
station-role root
rts threshold 2312
antenna gain 8
no dot11 extension aironet
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 port-protected
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
end

Id also appreciate if you can point out any improper config under this interface. Thanks!

Guest
 

Advertisement

Re:AIR-AP1231G-A-K9 Radio transmit power

Postby Guest » Thu Dec 09, 2010 6:04 pm

Hi,

   No.  You don have to configure the power setting.  You can configure any power value you want, and the AP will compensate for the antenna gain to make sure that the TX power doesn go over the FCC regulation.

 

Regards,

Manuel

Guest
 

Re:AIR-AP1231G-A-K9 Radio transmit power

Postby Guest » Thu Dec 09, 2010 6:50 pm

So just leave the power to MAX and the AP will auto adjust it based on the regulation domain. Got it! Thanks!

Guest
 



  • Advertisement


Similar topics

Power Usage on a 7975 PoE Phone
Forum: Cisco IP Communications
Author: Anonymous
Replies: 0

1142N radio configs to support older clients
Forum: Cisco Wireless
Author: Anonymous
Replies: 0

confusion on transmit power
Forum: Cisco Wireless
Author: Anonymous
Replies: 0

Can Not Transmit Data on AnyConnect VPN Client
Forum: Virtual Private Networks
Author: Anonymous
Replies: 0

SRW2024P Phantom Power
Forum: Small Business Switches
Author: Anonymous
Replies: 0


Return to Cisco Wireless

Who is online

Users browsing this forum: Bing [Bot] and 3 guests