• Advertisement

Can automous 1242AG be upgraded to lightweight?

Configuring Wireless Cisco Networks and Wireless Controllers.

Can automous 1242AG be upgraded to lightweight?

Postby Guest » Tue Dec 28, 2010 5:30 am

We have serveral automous 1242AG AP. I wonder can I upgrade IOS to change it to lightweight?

 

Thanks.

 

Lou

Guest
 

Advertisement

Re:Can automous 1242AG be upgraded to lightweight?

Postby Guest » Tue Dec 28, 2010 5:37 am

After searching, I know 1242AG can be upgraded to lap. How about 1200 AP version 12.04? It maybe upgraded to IOS version. But not sure whether it can be upgrade lightweight.

 

Lou

Guest
 

Re:Can automous 1242AG be upgraded to lightweight?

Postby Guest » Tue Dec 28, 2010 6:38 am

Hi Lou,

 

Solution Requirements

 

Migration from autonomous access point mode to lightweight mode is possible on these Cisco Aironet access point platforms:

 

•All 1121 access points

 

•All 1130AG access points

 

•All 1140 access points

 

•All 1240AG access points

 

•All 1250 series access points

 

Note The Upgrade Utility version 3.2 does not support the conversion of 1140 and 1250 series autonomous access points to lightweight mode. To convert these autonomous access points to lightweight mode, telnet to the access point and issue the following command to upgrade the IOS:
archive download-sw /overwrite /reload tftp: //location/image-name


For more information, see Upgrading Cisco IOS on an Autonomous Access Point at the following URL:
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00809f0e94.shtml.

 

•For all IOS-based 1200 series modular access point (1200/1220 Cisco IOS Software Upgrade, 1210 and 1230 AP) platforms, it depends on the radio:

 

–if 802.11G, MP21G and MP31G are supported

 

–if 802.11A, RM21A and RM22A are supported

 

The 1200 series access points can be upgraded with any combination of supported radios: G only, A only, or both G and A.

 

Note For an access point that contains dual radios, if one of the two radios is an LWAPP-supported radio, the upgrade tool still performs the upgrade. The tool adds a warning message to the detailed log that indicates which radio is unsupported.

 

•All 1310 AG access points

 

•Cisco C3201 Wireless Mobile Interface Card (WMIC)

 

Note The second-generation 802.11a radios contain two part numbers.

 

Access points must be running Cisco IOS Release 12.3(7)JA or later before you can perform the upgrade.

 

 

 

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp157130

 


Cheers!
Rob

 

 

 

Please support CSC Helps Haiti

 

https://supportforums.cisco.com/docs/DOC-8895

 

https://supportforums.cisco.com/docs/DOC-8727

Guest
 

Re:Can automous 1242AG be upgraded to lightweight?

Postby Guest » Tue Dec 28, 2010 8:05 am

Thanks!!!

Guest
 



  • Advertisement


Similar topics

Are email alert configs saved when Fabric Manager is upgraded?
Forum: Storage Networking
Author: Anonymous
Replies: 1

rebooting Lightweight APs
Forum: Cisco Security
Author: Anonymous
Replies: 0

AP 1242AG Bridge
Forum: Cisco Wireless
Author: Anonymous
Replies: 0

1240 to lightweight with 2112
Forum: Cisco Wireless
Author: Anonymous
Replies: 0

Upgraded to 8.2(3) - Now CSD is not working
Forum: Cisco Security
Author: Anonymous
Replies: 0


Return to Cisco Wireless

Who is online

Users browsing this forum: No registered users and 1 guest