• Advertisement

Failed to add device to WCS Reason

Configuring Wireless Cisco Networks and Wireless Controllers.

Failed to add device to WCS Reason

Postby Guest » Wed Dec 22, 2010 1:10 am

Folks:

 

Here is the Situation not a Jersey Shore Character, Enterprise wise we have a WCS running version 7.0.164.0, and for  some reason one of my controllers was no longer being reported by the WCS.  I tried to re add the controller and to no avail.  I keep getting the following message:

Failed to add device to WCS Reason: COMMON-1: Some unexpected internal error has occurred. If the problem persists please report to the Tech Support. 

 

I have upgraded the software to 7.0.98 for the actual controller in question and I still get the same error message.  One more thing this controller still has an active map and access points that are on the WCS and are recognized.  Should this also be removed before I attempt to read the controller and then re-add these APs all over again?

 

Thanks for any input.

 

 

J. M.

Guest
 

Advertisement

Re:Failed to add device to WCS Reason

Postby Guest » Wed Dec 22, 2010 2:33 am

Hi,

 

remove the SNMP configuration completely from the wlc and then reconfigured it.. this may help you in re adding the WLC..

 

That is remove the SNMP trap receivers on the WLC..

 

lemme know if that helps and lemme know if this answered your question..

 

Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

Guest
 

Re:Failed to add device to WCS Reason

Postby Guest » Wed Dec 22, 2010 2:45 am

Thanks again for your help!!!!!!!!!!!!!!!!!!!!!!!!

Guest
 

Re:Failed to add device to WCS Reason

Postby Guest » Wed Dec 22, 2010 4:13 am

It was my pleasure assisting you!!

 

have a great day!!

 

Regards
Surendra

Guest
 

Re:Failed to add device to WCS Reason

Postby Guest » Wed Dec 22, 2010 5:13 am

Hi,

 

Here is the bug Id that i am suspecting..

 

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCti31540

 

Try the work around and please lemme know if htat worked..

 

lemme know if this answered your question..

 

Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

Guest
 



  • Advertisement


Similar topics


Return to Cisco Wireless

Who is online

Users browsing this forum: No registered users and 1 guest

cron