• Advertisement

Antennas combination

Configuring Wireless Cisco Networks and Wireless Controllers.

Antennas combination

Postby Guest » Thu Dec 09, 2010 4:30 pm


For a large warehouse, i will offer the AP AIR-LAP1262N-E-K.


My problem is about the number of antennas that i have to buy.

The plan is use the AP with 802.11a, 802.11g and 802.11n, but i don´t know if i have to buy three or six antennas always about the idea of have the max power. My plan is buy the antennas AIR-ANT2422DW-R=

 

Thanks in advance.

Guest
 

Advertisement

Re:Antennas combination

Postby Guest » Thu Dec 09, 2010 5:46 pm

Hi,

 

AIR-ANT2422DW-R= is a 2.4 Ghz antenna (hence 24 in the part number), so it only works for 802.11b/g/n. To have wireless onthe 5ghz (802.11a/n) then you need antennas made for 5ghz.

 

This means you need to buy 3 2.4ghz antennas and 3 5ghz antennas.

 

Hope this helps !

 

Nicolas

 

===

Don forget to rate answers that you find useful

Guest
 

Re:Antennas combination

Postby Guest » Thu Dec 09, 2010 6:47 pm

You have a lot of options. 

 

If you want a single-unit-only antenna for 2.4 Ghz and 5.0 Ghz then there can only be one candidate,  AIR-ANT2451NV-R.   Read through this document because it will be very useful.  Pay close attention to the vertical and horizontal “footprint” as well as the “do’s and do-not’s” in regards to installation.

 

Look at the document/link below for more choices, however, I would like to warn you that the 1260 does not support antenna with a gain of higher than -6dBm.   I have a very, very difficult time getting Cisco to update their out-of-sync documentation for the past 6 months.  (Nicolas, maybe you can provide us with some assistance?)

 

Cisco Aironet 2.4 GHz and 5 GHz Antennas and Accessories

Cisco Aironet Antennas and Accessories Reference Guide

Install and Upgrade Guides

 

Hope this helps your quest.  Please don forget to rate our useful posts. Thanks.

Guest
 

Re:Antennas combination

Postby Guest » Thu Dec 09, 2010 7:07 pm

Many thanks.

 

My problem is about the number so the model is selected, and it was resolved by ndarchis.

Like i will work with standards b/g/ because i´m from spain, 3 antennes is my number.

Guest
 



  • Advertisement


Similar topics

Is this combination of SPAs on a SIP truly not supported?
Forum: Anything Networking
Author: Anonymous
Replies: 0

Connecting Antennas on 1260AP
Forum: Cisco Wireless
Author: Anonymous
Replies: 0

Combination ports in Cisco 4948
Forum: Cisco Switching
Author: Anonymous
Replies: 0

How to position dipole antennas
Forum: Cisco Wireless
Author: Anonymous
Replies: 0

ISR 1941 WLAN-AP external antennas placement
Forum: Cisco Wireless
Author: Anonymous
Replies: 0


Return to Cisco Wireless

Who is online

Users browsing this forum: No registered users and 2 guests

cron