Hello Experts,
I made a intercluster trunk non gatekeeper controlled between call manager clusters.
Created
New Device Pool
New Region
Route Group (Trunk)
Route List
Route pattern.
I went to the DNA and here is the output;
Cisco Unified Communications Manager Dialed Number Analyzer Results
* Results Summary
o Calling Party Information
+ Calling Party = 6991
+ Partition =
+ Device CSS =
+ Line CSS = CSS_International
+ AAR Group Name =
+ AAR CSS =
o Dialed Digits = 6006
o Match Result = RouteThisPattern
o Matched Pattern Information
+ Pattern = 600X
+ Partition = Part_Internal
+ Time Schedule =
o Called Party Number = 6006
o Time Zone = Greenwich Standard Time
o End Device = SAT-TCF-RL
o Call Classification = OffNet
o InterDigit Timeout = NO
o Device Override = Disabled
o Outside Dial Tone = NO
* Call Flow
o TranslationPattern :Pattern=
+ Positional Match List = 6006
+ Calling Party Number = 6991
+ PreTransform Calling Party Number =
+ PreTransform Called Party Number =
+ Calling Party Transformations
# External Phone Number Mask = NO
# Calling Party Mask =
# Prefix =
# CallingLineId Presentation =
# CallingName Presentation =
# Calling Party Number = 6991
+ ConnectedParty Transformations
# ConnectedLineId Presentation =
# ConnectedName Presentation =
+ Called Party Transformations
# Called Party Mask =
# Discard Digits Instruction =
# Prefix =
# Called Number =
o Route Pattern :Pattern= 600X
+ Positional Match List = 6006
+ DialPlan =
+ Route Filter
# Filter Name =
# Filter Clause =
+ Require Forced Authorization Code = No
+ Authorization Level = 0
+ Require Client Matter Code = No
+ Call Classification =
+ PreTransform Calling Party Number = 6991
+ PreTransform Called Party Number = 6006
+ Calling Party Transformations
# External Phone Number Mask = NO
# Calling Party Mask =
# Prefix =
# CallingLineId Presentation = Default
# CallingName Presentation = Default
# Calling Party Number = 6991
+ ConnectedParty Transformations
# ConnectedLineId Presentation = Default
# ConnectedName Presentation = Default
+ Called Party Transformations
# Called Party Mask =
# Discard Digits Instruction = None
# Prefix =
# Called Number = 6006
o Route List :Route List Name= SAT-TCF-RL
+ RouteGroup :RouteGroup Name= SAT-TCF-RG
# PreTransform Calling Party Number = 6991
# PreTransform Called Party Number = 6006
# Calling Party Transformations
* External Phone Number Mask = Default
* Calling Party Mask =
* Prefix =
* Calling Party Number = 6991
# Called Party Transformations
* Called Party Mask =
* Discard Digits Instructions =
* Prefix =
* Called Number = 6006
# Device :Type= InterClusterTrunk-NonGatekeeperControlled
* End Device Name = SAT-TCF-CLUSTER
* PortNumber = 0
* Device Status = UnKnown
* AAR Group Name =
* AAR Calling Search Space =
* AAR Prefix Digits =
* Inbound Fast Start = Disabled
* Outbound Fast Start = Disabled
* Call Classification = Use System Default
* Tunneled Protocol = None
* Calling Party Transformations
o PreTransform Calling Party Number = 6991
o Calling Party Selection = Originator
o Calling Party Presentation = Default
o CallerID DN =
o Calling Party Number = 6991
* Alternate Matches
o Note: Information Not Available
NOTE: The analysis results are purely based on configurations available in the Cisco Communications Manager database. For Gateway outbound calls, call
details might differ depending on the Gateways settings.
Help will be highly appreciated.
here is some troubleshooting ....