• Advertisement

ME3400 Interface Speed

Static, RIP, EIGRP, OSPF, BGP, IBGP, IS-IS and any other routing.

ME3400 Interface Speed

Postby Guest » Tue Nov 17, 2009 12:36 am

I have a bunch of ME-3400G-2CS-A switches and Im getting drops due to having 100Mb on one side and 1Gb on the other side as explained here:https://supportforums.cisco.com/thread/2061963?tstart=0.

I have put in the service policy to amend the Queue limits, but Im still seeing drops.


We have one site which is 1Gb on both sides, and this has no drops.

So as a workaround, Id like to manually configure the "inside" of the switch to manually be 100FDX.

However, the interface won accept the speed/duplex commands. I am using the built-in RJ45 port, not the SFP port, but I suspec the switch sees both as the same physical port, so Im hitting this issue..

 

http://www.cisco.com/en/US/docs/switches/metro/me3400/software/release/12.2_25_seg_seg1/configuration/guide/swint.html#wp1080632

 

Can someone please confirm

 

Regards

Neil

Guest
 

Advertisement

Re:ME3400 Interface Speed

Postby Guest » Tue Nov 17, 2009 2:13 am

Hello.

You have to configure MEDIA-TYPE RJ before set the interface speed 10/100/1000.

This sound like:

 

interface GigabitEthernet0/1
media-type rj45
speed 100

 

 

Bye

Guest
 

Re:ME3400 Interface Speed

Postby Guest » Tue Nov 17, 2009 3:51 am

Thanks. So **** simple! I thought that as the box had correctly figured out it was live on the RJ45, then I didn need that line.

Guest
 



  • Advertisement


Similar topics


Return to Routing Protocols

Who is online

Users browsing this forum: No registered users and 1 guest