• Advertisement

SRW224P will not power Aironet APs with POE

Linksys, Netgear, ect. Webbase configurations for switches or layer 2 devices.

SRW224P will not power Aironet APs with POE

Postby Guest » Wed Sep 29, 2010 2:40 pm

It will power my Avaya IP phones just fine.

Guest
 

Advertisement

Re:SRW224P will not power Aironet APs with POE

Postby Guest » Wed Sep 29, 2010 3:51 pm

Perhaps you are exceeding the power budget of the switch?  I think the PoE Power budget is 180w max.  Also it will power only 12 ports @ 15.4w maximum 802.3af PoE.  Any idea on how many watts your Avaya phones are using?

Guest
 

Re:SRW224P will not power Aironet APs with POE

Postby Guest » Wed Sep 29, 2010 3:59 pm

The AP will not power up over POE even with all IP phones disconnected. The AP is known good as I can power it up over POE on a 6500 switch.

Guest
 

Re:SRW224P will not power Aironet APs with POE

Postby Guest » Wed Sep 29, 2010 4:24 pm

Im assuming you have an autonomous access point. I had an Aeronet AP that only appeared to work with the power brick. What I found is that the AP did not recognize the power source so it would not turn on the radio. Go to the CLI on the AP. There is probably an error message about power. I believe it gives you the command to tell the AP that its ok to use the power from the switch.

Guest
 

Re:SRW224P will not power Aironet APs with POE

Postby Guest » Wed Sep 29, 2010 5:22 pm

How can I see the CLI if there is no power to the AP? Thanks.

Guest
 



  • Advertisement


Similar topics

Problem with multiple ssid on cisco aironet 1130g
Forum: Cisco Switching
Author: Anonymous
Replies: 0

Power Usage on a 7975 PoE Phone
Forum: Cisco IP Communications
Author: Anonymous
Replies: 0

AIR-AP1231G-A-K9 Radio transmit power
Forum: Cisco Wireless
Author: Anonymous
Replies: 0

confusion on transmit power
Forum: Cisco Wireless
Author: Anonymous
Replies: 0

SRW2024P Phantom Power
Forum: Small Business Switches
Author: Anonymous
Replies: 0


Return to Small Business Switches

Who is online

Users browsing this forum: No registered users and 1 guest