• Advertisement

half duplex or full duplex configuration for MDS9124 management port?

Support for NAS servers.

half duplex or full duplex configuration for MDS9124 management port?

Postby Guest » Tue Aug 11, 2009 4:00 am

Hi All,

 

Is it possible to set the management port of mds 9124 about half or full duplex configuration?

 

I want to correct following error:

 

Jun 13 10:27:20.799 GMT: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet4/18 not half duplex, with mtw1pc02bs0(FOX1450G8QG) mgmt0 (half duplex).

 

it seems mds 9124 set his port to half duplex.

 

Dennis

Guest
 

Advertisement

Re:half duplex or full duplex configuration for MDS9124 management port?

Postby Guest » Tue Aug 11, 2009 5:00 am

You may want to check this thread :

 

https://supportforums.cisco.com/thread/2059109

 

Else try the following :

 

switch# config terminal

switch(config)#

switch(config)# interface mgmt0

switch(config-if)# switchport duplex full

 

switch(config)# exit

switch#

switch# copy running-config startup-config

 

Also, I would suggest you check what the counterpart of your MDS switch mgmt interface is set to (i.e. is it set to autoneg, then try setting it to fix speed/duplex or the other way around).

Guest
 

Re:half duplex or full duplex configuration for MDS9124 management port?

Postby Guest » Tue Aug 11, 2009 5:49 am

Hi Dennis,

 

You might have hit bug CSCte76880 (http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCte76880)

 

Configure both interfaces to auto duplex achieve a full duplex connection as a workaround, or upgrade to 4.2(7e) or 5.0(4d) where the fix has been integrated.

 

Best Regards,

Vincent

Guest
 

Re:half duplex or full duplex configuration for MDS9124 management port?

Postby Guest » Tue Aug 11, 2009 7:22 am

Hi Dennis,

 

is there a reason you e not using auto detect?

Guest
 

Re:half duplex or full duplex configuration for MDS9124 management port?

Postby Guest » Tue Aug 11, 2009 8:20 am

Hi Kris,

 

Becasue network admin told me that he got the error message:

Jun 13 10:27:20.799 GMT: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet4/18 (not half duplex), with mtw1pc02bs0(FOX1450G8QG) mgmt0 (half duplex).

 

Best Regards,

Dennis

Guest
 



  • Advertisement


Similar topics


Return to Storage Networking

Who is online

Users browsing this forum: No registered users and 1 guest

cron