Page 1 of 1

5K Port-Channel Issue

PostPosted: Mon Dec 27, 2010 4:46 am
by Guest

Im getting the following error when I try to configure

my uplinks on my 5K back to my 7Ks.

     command failed: port not compatible [DCE mode]

 

Im currently running NX-OS: n5000-uk9.5.0.2.N1.1.bin

Any ideas would be helpful.

 

interface port-channel10

  switchport mode trunk
  vpc 10
  switchport access vlan 5

  switchport trunk native vlan 2005

  switchport trunk allowed vlan 5,7

  speed 10000

 

interface Ethernet1/33
  switchport mode trunk
  switchport access vlan 5

  switchport trunk native vlan 2005

  switchport trunk allowed vlan 5,7

 

 

 

 

 

  spanning-tree port type network
  udld aggressive

 

channel-group 10 mode passive
command failed: port not compatible [DCE mode]


Re:5K Port-Channel Issue

PostPosted: Mon Dec 27, 2010 5:23 am
by Guest

There is a bug for this issue which is fixed in 5.0(2)N2(1) which is on CCO. Here is the bug details

 


CSCtk04010 Port errors when adding to port-channel port not compatible [DCE mode]
Symptom:
Cannot add port to port channel.

 

Error:
command failed: port not compatible [DCE mode]

 

Conditions:
adding ports to port channel

 

Workaround:
remove and re-add the port channel config

 

Upgrading or re-adding the config should work

Kind regards,

 

Maarten Vervoorn