• Advertisement

SNMP OID for IPSLA shows UP also if Operation failed

MIBS, SMMPv1, SMMPv2, SMMPv3 and management

SNMP OID for IPSLA shows UP also if Operation failed

Postby Guest » Wed Jan 05, 2011 11:16 am

High , I used following test-applet to check perdiodically the status of ip sla 199

 

ip sla 199
icmp-echo 7.192.196.101 source-interface GigabitEthernet0/1
request-data-size 100
threshold 400
ip sla schedule 199 life forever start-time now

 

event manager applet test

event snmp oid 1.3.6.1.4.1.9.9.42.1.2.9.1.6.199 get-type exact entry-op ge entry-val "0" poll-interval 1 maxrun 200
action 100.0 if $_snmp_oid_val eq 1
action 110.0  set _sla199status "DOWN"
action 120.0 else
action 130.0  set _sla199status "UP"
action 140.0 end

 

 

it works fine if the ipsla show as result timeout which result in a value of 1 in the snmp-variable.

 

if I shutdown the source-interface of ip-sla there are differnt behaviours

 

on 7200 the

Latest operation return code: timeout

 

and the snmp-var is 1 which means down

 

 

on 3900e

Latest operation return code: Operational failed

 

and the snmp-var is still 2 which means up

 

 

Do I misunderstand anything or could it be a IOS-Bug

 

 

Hubert

Guest
 

Advertisement

Re:SNMP OID for IPSLA shows UP also if Operation failed

Postby Guest » Wed Jan 05, 2011 11:59 am

The object 1.3.6.1.4.1.9.9.42.1.2.9.1.6 which is rttMonCtrlOperTimeoutOccurred.  If a timeout did not occur, then the value is expected to be 2 (false).  Therefore, what you e seeing is expected.  You might consider using 1.3.6.1.4.1.9.9.42.1.2.10.1.2.199.  If the value of this object is anything other than 1, then an error has occurred.

Guest
 

Re:SNMP OID for IPSLA shows UP also if Operation failed

Postby Guest » Wed Jan 05, 2011 12:07 pm

Thx for the response, in the meantime I found out myself. I was a little bit confused, because I

thought with M2 this is the correct behaviour (but it seems with M2 this was wrong behav

iour and with M3 now it works correct)

Guest
 



  • Advertisement


Similar topics


Return to Network Management

Who is online

Users browsing this forum: No registered users and 1 guest